Best Tire Pressure Gauge 2017

tire-pressure-gaugeYou need to always have you tires inflated as it’s safer for you when driving. Underinflated tires mean excess heat when you drive and this may give tire failure. When they don’t have enough air pressure, tires may wear sooner and unevenly, waste fuel and have a bad influence on your driving just as well.

In order to expand your tires life span, you have to use a tire-pressure gauge to check the pressure of your tires at least every 3-4 weeks before going on a long trip. Your car has to be parked for three or more hours before you check the pressure.

The main info

There are so many models of tire pressure gauge out there and it might get a bit challenging to choose the right option for you. In order to make it easier, you need to define your needs and liking and reading some tire pressure gauge review helps you a bit.

The value on your tire pressure gauge is provided, more than anything, by its ability to be consistent and repeatable. It seems that is not important if the gauge reads states 35 psi or 40 psi if you’re always using the same gauge.

If you really want consistency on your gauge, you need to buy a lower priced gauge to compare once in a while the two readings. You can store the other gauge in a safe place where the temperature is constant most of the time. Just because a tire pressure gauge is lower priced doesn’t mean it loses its accuracy; it might be a difference of features or materials.

There are some other important things to consider when buying a tire pressure gauge. You need to decide, first of all, if you want a digital or an analog tire pressure gauge, but also the pressure ranges that you have to measure.

The size of the gauge face display is also something to keep in mind, as it is the angle chuck or ball chuck end. And, let’s not forget you have to decide if you want standard or liquid filled tire pressure gauge.

A closer look

A digital tire pressure gauge is way easier to read, but it’s typically more expensive. The analog gauge is more simple, therefore, easier to use and …less expensive.

An important downside for the digital tire pressure gauge is the battery that wears out in time. Of course, most models out there automatically turn off in 5 minutes or so, when not in use and some digital tire pressure gauges use AAA batteries.

If you still can’t decide if you should go analog or digital, think that most racers use analog tire pressure gauges. The digital gauges are the most popular choice when they are offered as presents, so…it’s a tough call.

More choices

You can also stick with a liquid filled gauge. This type of tire pressure gauge is filled to just 80% and the remain 20 % air pocket allows thermal expansion and contraction when the surrounding temperature changes. This gives accuracy on the reading. For more accuracy, some quality liquid filled gauges come with a special vent valve, providing a wider operating range. You can equalize internal and external pressure by turning the knob. This type of tire pressure gauge used to be a popular choice some while ago and the analog and digital gauges took its place forever.

The conclusion

No matter your choice, you still need to take care of your tire pressure gauge, like it’s any other sensitive tool in your garage. It may be long lasting, just as long as you give minimum attention to it. A tire pressure gauge doesn’t get damaged by the vibrations inside the car, but it might suffer when thrown around in your garage. Store the tire pressure gauge in cold locations during winter time and keep it away from major fast temperature changes.

 

Top 5 best tire pressure gauge

It might come as a surprise for you, but sometimes you can get a good, reliable tire pressure gauge even for not so much money.

The Campbell Hausfeld Tire Inflator, 3-in-1 Inflation Gun, Locking Chuck and 2-inch Gauge, ¼” NPT and Flexible Hose (MP600000AV) is easy to use when connected to your air compressor and combines 3 tools in one compact design.

The hose is flexible and is easy to move into heel wells and other tight areas. The gauge is easy to control thanks to the large, readable 2” diameter gauge. The range is pretty wide from 10 to 150 PSI. The inflation gun comes with a side relief valve to bleed off air and lower the pressure in over-inflated tires so that you can get the right inflation.

The hands-free chuck design makes the inflation gun easy to connect.

The tool is also eco-friendly as it lets you optimize the gas mileage. The materials are good quality and the tools are easy to use. The hose locks onto the valve stem.

Here are the main pros:

  • The gauge is reliable and easy to use
  • The built-in relief valve is efficient
  • This combine an inflation gun, chuck and gauge
  • You can easily one handed operate it
  • The hose locks onto the valve stem

As for the cons, there are some:

  • The inflation connector is not very good quality
  • There is a cheap feel to the gauge

As it’s precise and easy to use, the Campbell Hausfeld is a good option when you’re short on a budget.
Small and accurate, the TireTek Flexi-Pro Tire Pressure Gauge, Heavy Duty Best for Car & Motorcycle – 60 PSI is a reliable tire pressure gauge that you can get for your car/motorcycle.

The mechanical tire gauge is calibrated to ANSI B40 and has an international accuracy standard to ensure an accurate reading. The gauge features also an integrated bleed button for accurate tire pressure adjustment of over inflated tires.

The gauge has a steel construction and a 5mm chuck tip so the seal is perfect, with no air leakage. The tool is rigged and comes with a rubber cover that protects it when dropping it. The hose has rubber reinforcement for the same reason.

The TinTek Flexi-Pro features a 360 degree angled rotating nozzle so that you can read the tire valve from any angle. The scale is large and easy to read and the pressure holding function maintains the readout even after you took it off the valve.

The gauge is versatile and you can use it for any car, SUV, RV, ATV, truck, motorcycle or bike.

You don’t need any batteries for the gauge. The design is efficient and the readings are accurate. It’s very easy to set the gauge onto the valve and you can read it without having it attached to the valve.

Let’s highlight the main pros:

  • The tire pressure gauge is easy to read and gives accurate readings
  • You can read the pressure without having the gauge attached to the valve
  • The gauge is protected from any droppings
  • The measurement ranges of 0-60 PSI, making it versatile

As for the cons, the list is very short:

  • The readings start a bit high
  • The durability of the gauge is a bit questionable

Practical as you don’t need to use batteries for it, reliable and versatile, the TireTek Flexi –Pro is a great tire pressure gauge to get when in need.

 

The more you are willing to pay, the more you can expect from your tire pressure gauge. The Longacre Deluxe 2 ½” GID Tire Gauge 0-60 by ½ lb. 52003 gives highly accurate readings and measurements ranging from 0 to 60 PSI.

The gauge is analog and glows in the dark. It’s 2-1/2 in diameter and features a white face. It comes with ½ lbs. increments and gives fast readings.

The gauge is easy to use and read and gives precise readouts. The hose is flexible and has just the right length. The dial holds its position until air is released with release button.

You also get the ball chuck with the gauge. When it comes to the good features, we also need to mention the damped needle. The gauge comes also with rubber around dial, which protects it in case of dropping. The Longacre Deluxe has a rugged construction and valve connects easily. The gauge is able to register pressure repeatedly and you can bleed off excess pressure.

Let’s sum it all up and write down the main pros:

  • The analog tire pressure reads very fast and accurately
  • The valve connects easily
  • The rubber around dial protects the gauge
  • The hose is flexible and has the right length

As for the cons, here are ours:

  • The gauge is a bit difficult to use on motorcycles
  • The gauge doesn’t come with a case

As you can see, the cons are minor issues and don’t minimize the great value of the pressure gauge.

 

Accurate and consistent in its readings, the Tire Pressure Gauge Accurate Monitor System for Cars and Motorcycles has analog display and is tested and rated to ANSI standards.

The gauge permits 360-degree rotation for easier reading. It comes with Military grade rubber casing that protects it in case of dropping. The 17-inch air hose is flexible and easy to maneuver.

The gauge comes also with 2 solid metal tire chucks for use in Schrader Values which makes it useful for SUV cars and motorbikes.

You don’t need to use battery for the gauge. The display is analog and large for fast and easy reading. It holds the reading until you deflate it back to zero.

The gauge is liquid filled, which prevents from moisture getting into the dial face that is filled with liquid glycerol for all weather conditions.

The gauge has a well thought out design and a rugged built. The heavy glass gauge is shock resistant and it’s easy to access the difficult areas with the gauge.

Let’s highlight the main pros:

  • The gauge gives accurate and fast readings
  • The gauge comes with protective rubber booty and metal case
  • The dial is large and easy to read
  • The bolt chuck is easy to align

As for the cons, there aren’t many either:

  • Some experienced some leaks
  • The hose could be more flexible

Despite the minor issues, the gauge is a reliable, easy to read and use, tool.
The Longacre MagnumTM 3 ½” GID Tire Gauge 0-60 by ½ lb. 52001 is a tire pressure gauge that gives accurate readings and glows very bright in the dark.

The tire pressure gauge has a wide range of measurements from 0 60 60 PSI. The graphics looks great and is very easy to read. You can now read in 1/2lb. increments and includes both angle and ball chucks, and dual bleed buttons for faster setting.

The face is 3 ½” big and a Glow-in-the-Dark, for high accuracy and easy readability. The dual bleed buttons make the setting faster with 2% precision. The swivel angle chuck installed has alternate ball chuck and includes “Holds Pressure until released” internal gauge damper for more consistent, precise readouts.

The gauge is made in our USA and comes with a silver case for safer storage. The hose is red, which makes it nice looking also.

The tire pressure gauge has a good built. The rubber cover protects the tool when dropped.

Let’s pinpoint the main pros:

  • The gauge gives accurate, reliable readings
  • The gauge glows very brightly in the dark
  • The gauge comes with a useful case
  • The gauge is easy to use and read

Apart from its price, we can’t think of any cons on the gauge.

Reliable, consistent and very easy to use even in the dark, the Longacre Magnum is a great tool to have around the house.

 

Best Tire Pressure Gauge for Cars 

The Astro 3081 Dial Tire Inflator is a heavy duty tire pressure gauge that is not only ready to take the heavy use, but also to always give accurate readings.

The Astro 3081 is a 3 in 1 function tool: it inflates, deflates and measure tire pressure with two position inflate/deflate lever. It’s an aluminum die-casting unit that features a rubber sleeve for more comfort and longer life span.

The gauge comes with a large display so it’s easy to read. The unit comes with a 21-inch hose and the gauge needs a two-handed operation.

The Astro 3081 has a sturdy build and is able to take even the professional level use. The design is well thought out and the operation is quite intuitive. The unit is hefty and clips easily on the valve stem. It gives accurate readings and is both easy to use and to adjust. It’s made with strong quality parts and leaves a solid feel.

Let’s pinpoint the main pros:

  • The Astro 3081 takes the heavy duty use
  • Is great to use for cars
  • The gauge is easy to use and read
  • The readings are accurate

As for the cons, they are worth to mention:

  • The gauge is not for bicycles
  • The grip is not angled so it’s not easy to go in the tight areas
  • The gauge doesn’t come with a quick-connector nipple

No matter if you get it for your home garage, or for your professional shop, the Astro 3081 is a reliable and very accurate tire pressure gauge.

 

Best Tire Pressure Gauge for Racing/Drag Racing 

As it’s not only accurate, but also easy to use and seals just right to the tire stem, the Joes Racing 32310 (0-60) PSI Tire Pressure Gauge with Hold Valve is a reliable tool to get for you drag racing.

The tire pressure gauge glows in the dark and it’s not easy to read only at day, but also at night. It ranges from 0 to 60 PSI and it gives precise readouts.

The analog tire pressure gauge has a 2-1/2 in diameter display which makes it easy to read. It comes with 1lb. increments and a pressure hold valve. You can read the pressure as it holds the pressure for a while.

The tire pressure gauge features also an efficient bleed button and two types of valve. It doesn’t need batteries and the hold valve feature is very useful. The Joes Racing 32310 is very well made and may be used also on motorcycles.

The gauge attaches to the tire stem securely and there is no leakage. The tube is the perfect length and the gauge is visible in the dark. The readings are accurate and consistent. The easy reset button is another great feature to consider.

As it comes with a cover, you don’t need to worry much if ever dropping it.

Let’s make a short list of pros:

  • The gauge is easy to use and reliable
  • The readings are consistent and accurate
  • There are many good features: the bleed button, the hold valve feature
  • The gauge is visible in the dark also

Here it is the short list of cons:

  • The bleed valve could be of better quality
  • The hose is not as durable as the unit

All in all, for your drag racing experience, you can rely on the Joes Racing 32310 anytime.

Best Tire Pressure Gauge for RV

Providing a good range, up to 100 PSI, the  JACO FlowPro Tire Inflator Gauge – 100 PSI is a dependable option to consider for your RV tires.

jaco-flowpro-tire-inflator-gauge-100-psi

The tire gauge meets the International Accuracy Standards (+/- 2-3%) and ensures accurate readouts and inflates up to 100 PSI with no need for batteries.

The Jaco FlowPro comes with a very long, tough 20” air hose that is made with reinforced rubber for more durability. The length provides also better access to the narrow areas. The glow-in-the-dark dial display is very efficient for the use in dim lit spaces and even at night.

The unit has a long lasting steel body with a built-in air bleeder valve for fast decrease pressure in the case of overinflated tires and quick reset readings to zero.

A rugged rubber protective cover on the gauge dial head keeps it safe for accidental drops.

The numbers on the dial are large so it’s easy to read it. The extra screw on the nozzle is a nice detail. The gauge has a strong built and is very well made, with high quality materials. The clamp attaches easily and you can remove it with no air loss.

The gauge is solid and easy to use. It has a cool, sturdy design and the clamp and hose are thick. You can use it for auto and bikes just as well.

Let’s pinpoint the main pros:

  • The gauge comes with a 20” rubber hose
  • It’s easier to access the tight areas as the hose is long
  • The glow-in-the-dark feature makes the gauge usable at night or dim lit spaces also
  • The readings are accurate

When it comes to the parts we like less, there are only a few:

  • The clip on style air fitting slips off sometimes
  • You can’t use if for the portable 12V tires inflators

All in all, the Jaco FlowPro is a reliable, precise and easy to use unit for your RV tires.

 

Best Tire Air Pressure Gauge 

The analog Intercomp (360060) 4″ 60 PSI Glow Air Pressure Gauge doesn’t not only give precise readings, but it’s also easy to use in so many various situations.

The tire pressure has a great, art deco design but it’s not only its look that matters. The range is pretty good, from 0 to 60 PSI and there are many features that count as pros.

The 4in diameter and the large numbers on the display make the gauge easy to read. The glow-in-the-dark features is very efficient and you can easily read it at night or in dim lit work areas.

The gauge comes with 1lb. increments and white face.

The gauge is very well made in our USA and it’s reliable for long time use. The needle is very steady and the readouts are accurate every time. The rubber hose has just the right length and it’s flexible for easier handling. The push button release valve is functional so you can easier maneuver the gauge.

Let’s highlight the main pros:

  • The gauge gives accurate and reliable readings in many situations
  • The gauge is easy to use and to read
  • The glow-in-the-dark feature makes the reading possible at nigh/dim lit spaces
  • The push button release valve is efficient

When it comes to the parts we’re not very fond of, there are only few:

  • The gauge has no hold valve
  • There is no swivel at the valve end either
  • The nozzle is not angled

Despite the cons, we still consider the Intercomp to be a great choice as a tire air pressure gauge for various needs.

 

Best Tire Pressure Gauge Bicycle 

When you use a tire pressure gauge for your bike, handling it easy is very important. The JACO Elite Tire Pressure Gauge – 60 PSI not only gives accurate readings, but it’s also comfortable in the hand and very easy to use on your bike.

Its performance has been tested and certified to the International Accuracy Standards and gives +/- 2% readings.

The gauge doesn’t use batteries and the body is made of heavy duty steel and brass. The unit is not only rugged and able to take the heavy use, but also resistant to rust and swivel.

The gauge feels comfortable and solid in the hand. It comes with a rugged protective guard cover so it’s protected in case of a drop.

The built-in air bleeder valve minimize pressure in overinflated tires and the 360-degree swivel chuck gives easy access to the tire valve from any position.

The 2” dial is clear and easy to read, whereas the glow-in-the-dark features makes the gauge efficient even at night or in poorly lit spaces. The single increment scale glows in the dark and the readouts are precise. They also lock in place when the pressure reset button is pushed. So, another great feature of the gauge is the reset button from the neck.

The gauge comes in a rugged steel casing that protects is safely when not in use. The grip is very steady thanks also to the rubber non-slip shield.

The gauge is easy to use one-handed and the stem rotates for easier reading.

Let’s make a short list of pros:

  • The gauge has a good grip and is very easy to handle
  • The reading is precise and the pressure reset button holds it until pushed
  • The gauge has a rugged, brass body that is durable and rust resistant
  • The gauge is easy to use and read even at night

As for the cons, the list is so much shorter:

  • The black color of the gauge makes it a bit difficult to see the gauge at night (but you can see the dial)
  • The gauge might leave a bulky feeling to some

As these cons are not deal breakers, the gauge is a great tool when you want to take good care of your bike tires.

 

Best Electronic Tire Pressure Gauge 

The Garage Ready Premium Tire Inflator – Professional Series with Digital Pressure Gauge (Professional) gives instant and highly accurate readings. The range is pretty wide, from 0 to 170 PSI.

The digital backlit display is highly efficient and the gauge instantly reads and shows clearly the precise readings.

The gauge is very easy to use and the auto shut off feature is functional and saves the battery life. You can select the configuration you need by choosing the pressure mode you want. The gauge auto shuts off after 15 seconds.

You also get the inflation gun, chuck and gauge as they are all combined into an easy to use unit.

The built-in relief valve lowers the pressure in over-inflated tires.

The chuck clips onto Schrader valves easily and connects easily. The locking valve stem connector is useful.

The gauge is easy to use and read at day and night and has a solid, rugged built. It’s lightweight and the price is great for the quality you get.

Let’s highlight the most important pros:

  • The gauge gives instant and accurate readings
  • The auto shut off feature is efficient
  • The gauge is lightweight, easy to use and read even at night thanks to the backlit dial
  • The gauge is reliable and efficient

As for the cons, there are only few to mention:

  • The gauge doesn’t come with batteries
  • You need Presta adapter for the Presta valve

All in all, the electronic gauge gives accurate, immediate readings and is highly versatile.

https://www.amazon.com/Garage-Ready-Premium-Tire-Inflator/dp/B01EGLS8H0/ref=cm_cr_arp_d_product_top?ie=UTF8

Best Tire Pressure Gauge for Motorcycles

When it comes to accuracy and consistency on readings, there is no need to worry with the Longacre Liquid Filled 2½” GID Tire Gauge 0-60 by ½ lb. 52002. The gauge has a new design, with great looking graphics that are not only easier to observe, but also nicer looking.

The gauge reads in ½ lb. increments and includes angle and ball chucks just as well. As for the readings itself, it’s 2% accuracy.

The gauge comes with a 17” hose that is flexible and easy to maneuver even in the tight areas. The hose comes with swivel angle chuck installed with alternate ball chuck included.

The unit holds pressure until released. The gauge is easy to use, easy to read and easy to hold just as well.

The gauge is very well made and the oil filled buffer makes the unit more reliable and more accurate for longer time.

There is great quality on the materials and the craftsmanship of the unit. The gauge is not only precise in readouts, but also consistent.

It’s easy to make a seal on the valve for a more efficient operation.

Let’s pinpoint the pros:

  • The gauge is accurate and consistent in reading
  • The 17” hose is flexible and easy to use
  • The gauge is easy to hold, to use and the read
  • The gauge is very well made and had a durability feel

As for the cons, there aren’t many things on our part to complain about:

  • You need to equalize the pressure inside the gauge
  • The knob to stabilize the pressure is not as durable as the rest of the unit

As these cons aren’t deal breakers, we still think the gauge is a dependable tool to use for your motorcycle when in need.

 

Best Tire Pressure Gauge Inflator 

Even though it’s digital, the Astro 3018 Digital Tire Inflator with Stainless Steel Braided Hose is still reliable and accurate.

The gauge comes with a new dual AAA battery powered design. the installation of the battery is easy to do and the batteries are common type, so you don’t need to go the extra mile to find them.

The gauge has a 21” stainless braided hose that means not easy maneuver of the gauge even in the narrow places, but also longer life span for the hose.

When it comes to accuracy, the gauge has a 0.1PSI for use with TPMS (Tire Pressure Monitoring System). The gauge displays KG, PSI or BAR measurement and the large face backlit LCD digital display is easy to read.

The unit is protected by a rubber sleeve for safer use and more comfort, not to mention durability. The gauge has two position lever: 1st position deflates and 2nd position inflates.

As for other useful features, we also have to talk about the easy change chuck system and the ability of the gauge to also work with nitrogen system and CO2.

The gauge comes with batteries and is very easy to operate. It has only one button operation and auto shut-off for longer battery life.

The gauge has a very good range, up to 175 PSI. the body is rugged and the unit snaps onto the valve stem easy. The gauge is easy to adjust, the use and to read.

Let’s make a short list of pros:

  • The gauge is accurate and easy to use
  • The hose is long and flexible
  • There is only one button for easier operation
  • The tool is dependable and consistent

As for the list of cons, is just as this short:

  • The unit is a bit bigger than you’d expect
  • The battery is not that easy to replace
  • The lever has a flimsy feel

Despite the cons, the Astro 3018 Digital Inflator with gauge is still a good unit to have for your needs.

 

Best Tire Pressure Gauge Made in USA

There are many great tire pressure gauges made in our USA and we decided to go this time with the Intercomp (360067) 2.5″ 0-60 PSI Liquid Filled Deluxe Air Pressure Gauge.

The analog gauge is made in our USA and has a strong, ever-lasting build. The gauge ranges good, from 0 to 60 PSI and always gives fast and accurate readings. The white face of the gauge makes the reading easier and more clear.

The 2-1/2” diameter face makes the reading easier. The gauge comes with 1lb. increments and is liquid filled. This means the gauge is not only long lasting, but also accurate for longer time. The gauge has a strong, rugged build and is ready to take the heavy duty jobs.

The bleeder on the gauge works very well and the gauge is versatile. The hose has just the right length and is flexible enough to reach the tight zones.

All the materials are only high quality and the craftsmanship is amazing. The design is well thought out and the gauge also looks very nice.

Let’s highlight the main pros:

  • The gauge is made in our USA
  • The gauge gives accurate and fast readings
  • The gauge is liquid filled, for longer and more accurate use
  • The gauge is dependable and versatile

As much as we care for it, there are some parts that count as cons:

  • The head doesn’t swivel
  • The gauge doesn’t come with a check valve

As these cons are too minor to count, the Intercomp 360067 is a great USA made tire pressure gauge.

Best Truck Tire Pressure Gauge 

The Motor Luxe Tire Pressure Gauge 100 PSI – Accurate Heavy Duty Dial for Your Car Truck and Motorcycle is the tool you might want to use for your truck tires, and not only. The tire pressure gauge comes with 4 free valve caps, so it’s not usable only for your truck tires, but also for other situations. 

The Motor Luxe 100PSI is tested and certified to ANSI B40 which means it meets the International Accuracy Standards (+/- 2%), giving fast and accurate readings.

You don’t need to use batteries for the gauge as it’s an analog one. The gauge has a rugged brass body that has a hefty feeling and is ready to take the heavy use. The gauge is reliable and precise for a long time. It has a rugged gear-style guard for better protection and comes with a flexible, no leak air hose for easier checking of your truck, auto, RV, bike.

The built-in air bleeder valve lowers levels in overinflated wheels and the 360-degree swivel chuck gives easier access to the valve from any angle. The gauge is easy to use from any position and in the tight areas also.

The 2” dial is easy to read and the glow-in-the-dark features makes the reading easy at night or in poorly lit places also. The single increment scale glows in the dark, just like the needle does.

The gauge features also a “lock” in place until the reset button on the neck is pushed, so it’s easier for you to handle and use the gauge.

The gauge gives accurate and consistent readings and is made with sturdy, high quality materials. You can bleed off the extra pressure to get the PSI you want.

The rubber cover protects the gauge and the air chuck has a good grip. The tube has a good length and is flexible for easier maneuver.

Let’s make a short list of pros:

  • The gauge is versatile and dependable
  • The reading is accurate and consistent
  • The gauge comes with 4 valve caps
  • The gauge is easy to use and read even at night

As for the cons, there aren’t many at all:

  • The tube is made of rubber
  • There’s too much rubber on the gauge, even though it’s protective and efficient at times

Despite the minor cons, the gauge is still a good option to consider when looking for a tire pressure gauge for your truck.